Ghost Immobiliser And Tracker Explained In Fewer Than 140 Characters

· 6 min read
Ghost Immobiliser And Tracker Explained In Fewer Than 140 Characters

Autowatch Ghost II Immobiliser Review

Autowatch Ghost is the next-generation in car security. It is inaccessible to thieves and cannot be started without a pin code or app authorisation.

The system is based upon the CAN Data network of your vehicle. It is silent, which means it can't be detected using common diagnostic tools or radio signals. The system does not require any electrical circuit cuts.

What is  ghost immobiliser near me ?

A Ghost Immobiliser is an instrument that helps to protect your vehicle from theft by blocking the engine from starting until you enter a unique pin code. It is a device that can be used on a variety of vehicles, and unlike traditional immobilisers, it doesn't require a fob or key to operate. It is also extremely difficult to bypass or hack, and works in silence. This means that a thief will have to be quick to flee without being caught.

It protects against signal jamming, spoofing, and key cloning - all techniques that thieves have employed to unlock cars equipped with standard immobilisers. The device also stops thieves from stealing your keys by digging through your mailbox or gaining access into your home to take the remote control. The device will stop thieves from driving off your pride and joy even if they manage get the key. It stops the remote from being started until they enter the code.

A ghost immobiliser, in contrast to passive immobilisers, which require a fob or key to be press to activate it they are designed to be completely sealed within the engine. It connects directly to the CAN data circuit of the vehicle. It uses buttons on your car's steering wheel, centre console or door panels to generate a unique pin code which you will need to enter before starting the engine. The system can also be put into service mode to allow your vehicle to start and drive for short amounts of time without the requirement for a PIN code, but it will then be able to exit service mode based on speed and time.

It is not possible to hack or evade the system, even with the most advanced equipment, such as RF scanners or code grabbing devices. It is also impossible for a regular immobiliser to disable it since the device does not send a signal as a standard vehicle immobiliser does, and only is functional when connected directly to the CAN circuit.

Due to its high-tech technology and ease of installation the ghost immobiliser has been insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can put the device in your vehicle for insurance purposes.

What is the Ghost Immobiliser Work?

Immobilisers stop your car from starting when the wrong remote or key is used. It does this by sending an error code from the wrong fob or key to the ECU (Engine Control Unit). The ECU won't recognize it and your car will not start. This is why it's crucial to ensure that your car is fitted with an immobiliser installed by a recognised and reputable specialist.

MotorGuard is the Midlands most trusted specialist in vehicle security and installer. We provide an Autowatch Ghost immobiliser fitting service for a broad range of modern vehicles, so you can rest sure that your prized possession is protected against potential thieves.

The Autowatch Ghost immobiliser is one of the world's first aftermarket CAN bus immobilisers and safeguards your vehicle from key-cloning, hacking and theft. It's designed to remain undetected by thieves since it doesn't have LED indicators or key-fobs, and can be hidden in the wiring of your vehicle to ensure that no extra hardware is needed.

Once it is installed the system is connected to your vehicles CAN system and allows you to create a unique disarm sequence with your own pin code which must be entered to allow you to drive the vehicle. This pin code can be as long as 20 presses long for added security. Should you forget your pin code or if the button is damaged, the device has a secure emergency PIN code that can be used to reset it and allow your vehicle to start again.

It is because the Ghost immobiliser isn't able to be bypassed or hacked, that it is such a deterrent to thieves. It is also TASSA (Tracking and Aftermarket Security Systems Association), which could reduce the cost of car insurance.

As technology continues to advance Ghost immobilisers are getting more sophisticated. In this regard, we suggest contacting an Autowatch Ghost immobiliser fitting service as soon as you can to ensure that your pride and joy is fully protected. If you're purchasing a new car or want to upgrade your existing vehicle, you can count on us to provide you with a top-quality service so that you can enjoy your joy and pride for a long time to come.

Is a Ghost Immobiliser compatible with my car?

The Ghost is the first aftermarket CAN bus immobiliser the world to provide total protection from modern-day vehicle theft. It provides protection against key cloning, car hacking as well as ECU swapping. The new TASSA-verified Ghost-II system also allows marking of your vehicle, linking to the International Security Register and enabling your insurance company to verify that you have a Ghost system installed.

Our Ghost Immobiliser prevents theft by making it necessary for a unique pin code be entered, or for your smartphone to have our Autowatch app installed. It works just as a pin code on bank cards, making it impossible for thieves to drive away with your pride and Joy without entering the correct pin or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so there is no need for wire cutting and it works quietly. It is unnoticeable to thieves and isn't detected by the sophisticated scan RF and code grabbing technology that other systems utilize.

After the Ghost is fitted by our skilled fitters, it is completely concealed and inaccessible to the naked eye. it makes use of the buttons on your vehicle, for instance on the steering wheel, door panels, and the centre console to generate a unique pin code that has to be entered before your engine can start, just like a password on the bank account. Then, it is linked to your smartphone through the Autowatch app to allow you to go into a temporary "Service or Valet" mode that disables the ghost for up to 30 minutes whilst you give your vehicle to us for service or transport.

It's no surprise that the number of stolen vehicles has risen significantly. This is due to the high level customization and personalisation that is used in modern cars and the fact that many of us have older cars. It can take months to replace these costly and rare vehicles after they have been taken. Therefore it is crucial to ensure that your car from becoming the next target. A Ghost immobiliser is a low-cost investment that will keep your vehicle safe and even be used to recover it in the event of it being stolen.

Does a Ghost Immobiliser work on cut principle?

Ghost immobilisers stop your car from beginning until a PIN has been entered along with your key fob. This prevents thieves from cloning keys to cars or hacking into your car's computer system. It also can make them feel more secure leaving the vehicle alone.

Once it is fitted, your ghost immobiliser will create an individual pin code that can be as long as 20 digits using the buttons on your vehicle (steering wheel, centre console or door panels) which you must enter to start your vehicle. This code sequence is required every time you want to drive your vehicle as it is similar to a PIN or password on a credit card. The code can be easily reset by entering a number sequence in the Ghost application.

The Autowatch Ghost II CAN immobiliser also has two deactivation options for valet and service that allow you to temporarily start your vehicle without a code for access - just like keys - while it's in the garage, or with a valet parking provider. The immobiliser can be activated when your vehicle is in a parking spot.

The Ghost is unlike other security systems on the market. It doesn't have any LED indicators, and it works in a silent manner by utilizing the CAN data network that is in your vehicle. It's also not prone to the same type of circuit cuts that many other security systems are since it doesn't use radio signals.

It can also be hidden and discretely installed, making it impossible for thieves to find. It is also not recognized by sophisticated scanning tools or code grabbing technology that are commonly used to locate and disable security devices.


The Ghost is a sophisticated high-end, high-end CAN bus immobiliser. It offers superior protection against key replication and relay theft as well as car hacking. It's simple to set up and is undetectable by thieves. It also is not able to be deactivated with simple wire cutting. This makes it an essential for any driver who wants to safeguard their vehicle.